一，How to repair a broken paper surface
- If paper umbrella surface brushing oil
Two characteristics of paper umbrellas brush with tung oil：
- Smells like tung oil
- the umbrella surface is yellow
Step 1: Use a brush to apply rosin oil to the broken edge of the paper umbrella, not only reduces the hardness of the tung oil on the paper surface, but also allows the paper surface to fit better.
Step 2: According to the location and shape of the broken umbrella, cut a piece of paper with the same shape as the broken one,
- wet the paper
- cover the broken one
(The repaired paper must be 2-3cm larger than the breakage)
Step 3: After the paper is past on, gently press the repair position with your hand to make the paper fit the umbrella surface more closely
(the strength must be light to avoid the secondary breakage of the paper umbrella)
Step 4: When the break is thoroughly dry, use a paintbrush to apply paint similar to the color of umbrella.
(this will make the break look beautiful)
Step 5: Apply tung oil evenly on the whole umbrella surface with a brush,
not only makes the umbrella surface more beautiful, but also more durable
- umbrella is not brushed with oil
Step 1: According to the location and shape of the broken umbrella, cut a piece of paper with the same shape as the broken one.
wet the paper and cover the broken one(The repaired paper must be 2-3cm larger than the breakage
Step 2: After the umbrella surface is dry, you can paint or paste other beautiful objects on the broken surface, which makes the umbrella look more fashionable.
二，How to repair the umbrella bone
Step 1: Separate the damage umbrella bone from the inside of the umbrella holder
Step 2: Reassemble the new umbrella bone into the umbrella holder.
Step 3: Reattach the internal thread to fix the umbrella bone.
三，How to repair a broken handle
Step 1: Remove the bad handle
Use pliers to clip out the nails or pegs in the handle position,
then use a knife to gently chip off the handle (not too strong, so as not to cause the umbrella pole to break)
Step 2: Put the new handle in
Pour glue inside the new handle, then insert the umbrella pole (must be insert to the bottom of the handle)
四，How to repair the umbrella pole is broken
Step 1: need to separate the broken umbrella pole from the umbrella
- the umbrella pole on the wooden pegs with pliers to clip out
- Use the wooden pegs or nails at the head of the umbrella to clip out with pliers.
then gently rotate the umbrella pole clockwise
until the pole and umbrella frame are separat.
Step 2: Reassemble the new umbrella pole into it
- Insert the new umbrella pole into the inside of the umbrella, and then fix it with nails or pegs.